At Protec Direct, we offer a wide range of head protection equipment including safety helmets and bump caps, all of which are CE Approved to the relevant European Standards. All of our head protection can be used in conjunction with face visors and clip-on ear defenders, to maximise your personal protection. We also provide a range of helmet accessories, including chin straps, fleece helmet liners and ID cards, so you can find everything you need in one place
Hand protection gloves and sleeves can help to maximise safety, as well as ensuring you comply with international and European safety laws including EN420 (the general requirements for gloves). Find our full range of protective gloves and sleeves for a wide range of purposes below
When workers are exposed to fall hazards while working at elevations of more than five feet, or over water, fall protection is required. Typically, guardrails or other barriers are used to protect workers. In situations where guardrails are not practical, or when working from two-point suspended scaffolding, personal fall arrest systems (PFAS) (such as safety harnesses, lifelines, lanyards) are required. In some situations, positioning device systems such as restraint (tether) lines or aerial lifts are used to provide protection from falling off an unguarded edge.
Fire presents significant risk to businesses. It can kill or seriously injure employees or visitors and can damage or destroy buildings, equipment and stock. Organisations operating from single premises are particularly vulnerable as loss of premises may completely disrupt their operations. Many businesses fail to continue trading following a severe fire
Safety shoes are required where the potential for serious injury to the foot may result from an employee's daily job duties. Foot injuries may occur in areas where there are rolling or falling objects, objects piercing the sole, or where feet are exposed to electrical hazards. These guidelines are not intended to apply to functions performed by an employee on a rare or special occasion, unless the risk of foot injury is great.
With our rich industry experience, we are manufacturing a wide assortment of quality assured Traffic Cones, Rubber Speed Breakers and Convex Mirror etc. The offered range is precisely designed and manufactured using optimum quality raw material and innovative technology. These products and systems are known for their striking features like sturdiness, robust design, easy installation, high durability and abrasion & impact resistance Our esteemed clients can avail the offered range from us in various specifications at market leading prices.
The majority of impact injuries result from flying or falling objects, or sparks striking the eye. Most of these objects are smaller than a pin head and can cause serious injury such as punctures, abrasions, and contusions. While working in a hazardous area where the worker is exposed to flying objects, fragments, and particles, primary protective devices such as safety spectacles with side shields or goggles must be worn. Secondary protective devices such as face shields are required in conjunction with primary protective devices during severe exposure to impact hazards.
Workers exposed to excessive noise must use appropriate PPE including ear plugs, muffs, or both when engineering or administrative controls are not feasible to reduce exposure. Hearing protection is part of a hearing conservation program, which is required when noise exposure exceeds the action level [85 decibels on the A scale (dBA)].